Internet thinking Electronics Co., Ltd | Sign in | Registered account
  Enlish   繁體   日本語   German   中文
XCore407I  , STM32F4 Core Board SKU: XCore407I
  |  0 orders
Price
US $35.90 / PCS
Shipping
-->Arrival time 5-7 days
---->Arrival time 15-27 days
-->Arrival time 5-7 days
Quantity
 PCS
Parts Amount
US $35.90
 
Choose us! Escort for your needs!!!^_^
RF and microwave
Product Details
Part no.XCore407I
ManutacturerWaveshare
Date Code16+
Description, STM32F4 Core Board SKU: XCore407I
 DatasheetCheck Datasheet
-
$35.99 
$34.592+
$33.493+
$32.794+
DESCRIPTION
STM32 MCU core board, STM32F407IGT6, IO expander, USB HS/FS, Ethernet, NandFlash

Overview

XCore407I is an STM32 MCU core board that features the STM32F407IGT6 on board.

  • Clock circuit, USB power management
  • Onboard devices: USB HS PHY、Ethernet PHY、1G Bit NandFlash
  • Connectors:USB HS (mini / type A), USB FS (mini), Ethernet (RJ45)
  • All the idle I/O ports are accessible on the pin headers
  • 2.0mm pin header pitch, smaller size, easier to integrate into user system

Note : please consider the EVK407I, which supports easily programing/debugging.


What's On Board

STM32F407IGT6 development board on board resource

  1. STM32F407IGT6:the high performance STM32 MCU which features:
    • Core: Cortex-M4 32-bit RISC
    • Feature: a full set of single-cycle DSP instructions
    • Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
    • Operating Voltage: 1.8V-3.6V
    • Package: LQFP176
    • Memories: 1024kB Flash, 192+4kB SRAM
    • MCU communication Interfaces:
      • 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C
      • 1 x FSMC, 1 x SDIO, 2 x CAN
      • 1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY
      • 1 x 10/100 Ethernet MAC
      • 1 x 8 to 14-bit parallel camera interface
    • AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)
    • Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
  2. MIC2075-2, onboard USB FS power management device
  3. AMS1117-3.3, 3.3V voltage regulator
  4. K9F1G08U0D, 1G Bit NandFlash
  5. DP83848, Ethernet PHY
  6. MIC2075-1, onboard USB HS power management device
  7. USB3300, USB HS PHY
  8. Power supply switch, powered from 5Vin or USB connection
  9. Boot mode switch, for configuring BOOT0 pin
  10. Power indicator
  11. USB FS LED
  12. USB HS LED
  13. Reset button
  14. 8M crystal, MCU clock, enables the MCU run at higher speed by frequency multiplication
  15. 24M crystal, USB3300 clock
  16. 50M crystal, DP83848 clock
  17. 32.768K crystal, for internal RTC with calibration
  18. Ethernet connector
  19. USB FS mini connector
  20. USB HS mini connector
  21. USB HS type A connector
  22. MCU pins expander, VCC, GND and all the idle I/O ports are accessible on expansion connectors for further expansion
  23. USB OTG/HOST jumper
  24. VREF/VBAT jumper
  25. Ethernet I/O selection solder joint
  26. USB HS I/O selection solder joint
  27. PDR selection solder joint: 1.8-3.6V, -40~105℃ OR 1.7-3.6V, 0~70℃

Photos

dividerdividerdividerdivider

Note:
XCore407I does NOT integrate programing/debugging interface.
Mother board and accessories in the photos are NOT included in the price.


Dimensions

STM32 MCU core board dimensions


Development Resources

  • Related software (KEIL etc.)
  • Examples in C
  • Schematic (PDF)
  • Development documentations

Wiki: www.waveshare.com/wiki/XCore407I

PACKAGE CONTENT
REVIEWS

Related Products

 


$ 35.90 (USD)/PCS
 
 
 

www.int-thinking.net © 2006-2017 Internet Thinking(Hong Kong) Electronic Co.,Limited(Copyright)